Black Friday Sale Save up to 41% on KESS3 activations and bundles Ends 12 Jan 2027 Shop the deals
Skip to main content

PeterbiltECU Remap & Tuning

The most detailed tuning search on the market. Far more than power figures: the exact OBD cable for your vehicle, the tool we recommend, and every remap available.

  • Verified gains & dyno
  • Exact OBD cable
  • Recommended tool
  • EGR · DPF · AdBlue off

Search 43,000+ vehicle / ECU combinations

Current step

Select vehicle type

Start by choosing the vehicle category before we surface the matching brands.

Peterbilt ECU remapping · worldwide

Three-digit model numbers, three engine makers

Peterbilt numbers read like a code, but the engine under the hood is a separate question. In our catalogue the 386 and 388 are listed from 2004 and 2005 up to 2013 with Caterpillar C13 and C15, Cummins ISM and ISX 15, and Paccar MX engines. The newer 567 and 579 list MX-11 and MX-13, plus the ISX 15 on the 567 and the ISX 11.9 on the 579, on Continental CM1881 and CM2350 or Delphi ETC3.

Peterbilt appears here as 220 variants across 30 models. Open the model, then the variant that matches the engine and the controller label; the variant page lists the tool, the cable and the options.

By model family

Peterbilt tuning for owner-operators, vocational fleets and local delivery

367 and 365 for vocational use

Tippers, tankers and heavy-haul rigs make up much of this group. The rows include the Caterpillar C13, the Cummins ISM and ISL 9, and the Paccar MX-11, so engine choice varies truck to truck.

386, 388 and 389 on the highway

These are the conventional line-haul trucks. Older rows list Adem IV and Motorola controllers, newer ones Continental and Delphi.

The 330 and 335 for medium duty, and the 320 separately

The 330 and 335 list the PX-6, PX-8, C7 and ISC. The 320 is a low-cab-forward model often used for refuse work; it runs from 1999 to 2015 and spans the C7 to C11, ISM, ISX 11.9 and MX-11, so check the year as well as the engine.

For workshops

Before you read a Peterbilt ECU

With Alt Tune your shop does the read, uploads the stock file and gets back a calibration built for that truck. On a Peterbilt, check the following before you start:

  • Do not rely on the model number. The 384 lists Caterpillar, Cummins and Paccar engines, and each one has its own variant page.
  • Identify the controller. Motorola CM870 and CM871, Continental CM2250 and CM2350, and Delphi DMCI and ETC3 all appear in our rows.
  • Save stored codes. Record them first; our Paccar fault code pages help with the MX-engined trucks.
  • Keep the original file. It is your route back to factory and the base for the calibration we supply.

Prefer not to pull the ECU? In New Zealand you can also mail us the ECU. Handling Peterbilt trucks for customers? Become an Alt Tune dealer.

Peterbilt tuning questions

What does EST mean on a Peterbilt variant?

EST means an estimated figure. It is shown where we do not publish a measured one, and it is labelled so the two are never mixed up.

Which Peterbilt models have the widest choice of engines?

The 386 and 384 list the most engine codes; the 388, 320 and 367 also span Caterpillar, Cummins and Paccar. Start from the model, then choose the variant with your engine and controller.

Do you offer DPF, EGR and AdBlue solutions for Peterbilt?

Yes, on supported controllers. These can be added to a power tune or ordered alone; open the variant to see the options.

Looking at another make? See all truck brands.